03.096.DE.E0
  • 360
  • 03.096.DE.E0
  • 03.096.DE.E0
  • 03.096.DE.EL
  • 03.096.DE.EL
  • 03.096.DE.E0
  • 03.096.DE.E0

Safety locks Type 96DI - Right - Electronic action

• Safety locks for semi-automatic doors.
• Mechanical security interlocking device unlocking system in the centre of the latch
• Locks for mounting on doors on the left or doors on the right.
• Safety locks with or without auxiliary contact.
• EU Certificate according to standards of reference EN81-20, EN81-50.
• EAC Certificate.

More details

 
More info

Manufactured with pressure injected aluminium casing, steel locking pin, self_cleaning start up contacts with bimetal Ag. Sn. 90/10 rivets and transparent plastic cover to be able to see operation from outside. These locks have a mechanical security interlocking device unlocking system in the centre of the latch. A latch housing and contact plug has to be installed in the door. The latch housing is the part where the locking pin enters, freeing the mechanical sabety interlocking device.

These locks only require a power supply at 24VDC to their electronic circuit in order to operate the lock; the installation of any type of shoes or retractile wedge in the cabin is not required. The electronic system controls the voltaje and instensity received by the coil and once driven it fits it to a situación of low consumption which holds its position indefinitely.

All the process is visible from the exterior via two leds which indicate the situation of the system, one red led indicates that system is receiving current and is ready to activate and an intermittent green led indicates that the 24VDC coil is operating and the green led ON indicates that the coil is in maintenance situation (low consumption).

In order to guarentee that system operates with presence of the cabin on the floor it is necessary that the power supply received by the lock goes through a switch which will be in a closed position when the cabin is on the floor. The switch actuator has to be adjusted in order to allow the lock to be opened only with in the margin laid down by Regulations. In spite of this swich, the manoeuvre has to be programmed to only provide power to the coil when it is on the floor in order to avoid a posible opening when the cabin goes past.

 
Data sheet
Product weight 1,32 kg
DC voltage 24V dc
Initial intensity 1,9 A
Maintenance intensity 250 mA
Dimensions 257 x 96 x 32 mm
Standards of reference EN81-20, EN81-50
 
Download

Gervall Catalog PDF®. Safety locks Type 96DI electronic action for semi-automatic doors

      (876.62k)
Download

Gervall Catalog PDF®. Safety locks Type 96DI electronic action for semi-automatic doors

      (882.67k)
Download

Gervall Catalog PDF®. Safety locks Type 96DI electronic action for semi-automatic doors

      (881.87k)
Download
 
Code Table

 

With series door contacts, series locks and car presence

Code Description
03.096.DE.E0 SAFETY LOCK RIGHT - ELECTRIC-CHAMFERED LOCKING PIN - 24Vdc
03.096.DE.E0.12 SAFETY LOCK RIGHT - ELECTRIC-CHAMFERED LOCKING PIN - 12Vdc
03.096.DE.E0.48 SAFETY LOCK RIGHT - ELECTRIC-CHAMFERED LOCKING PIN - 24-48V DC/AC

 

With series door contacts, series locks and car presence (without auxiliary contact)

Code Description
03.096.DE.EL SAFETY LOCK WITHOUT AUX CONTACT RIGHT - ELECTRIC - CHAMFERED LOCKING PIN - 24Vdc
03.096.DE.EL.12 SAFETY LOCK WITHOUT AUX CONTACT RIGHT - ELECTRIC - CHAMFERED LOCKING PIN - 12Vdc
03.096.DE.EL.48 SAFETY LOCK WITHOUT AUX CONTACT RIGHT - ELECTRIC - CHAMFERED LOCKING PIN - 24-48V DC/AC

 

4 other products in the same category:

Send a message

Safety locks Type 96DI - Right - Electronic action

Safety locks Type 96DI - Right - Electronic action

We will never spam you